CREALİTY K2 PLUS COMBO 3D YAZICI
- Creality K2 Plus CFS, çok renkli ve yüksek hızlı baskı yapabilen bir 3D yazıcıdır. Bu yazıcı, CFS (Color Filament System) ile dört farklı filament makarasını aynı anda kullanarak çok renkli baskılar oluşturmanıza olanak tanır. Hatta, ek CFS birimleri ile bu kapasite 16 renge kadar çıkarılabilir. Farklı malzemelerle baskı yapma imkanı da sunar (PLA, ABS, PETG gibi). Teknik özellikler açısından K2 Plus, 350 x 350 x 350 mm'lik büyük bir baskı alanına ve 600 mm/s baskı hızına sahiptir. Ayrıca, çift dişli doğru
- Ürün Kodu: 5HRDZTXYIP
- Marka: CREALİTY
- Kategori: 3D Yazıcı / FDM
- Stok: 20+
- 74.259,00 TLKARGO BEDAVA
Creality K2 Plus CFS, çok renkli ve yüksek hızlı baskı yapabilen bir 3D yazıcıdır. Bu yazıcı, CFS (Color Filament System) ile dört farklı filament makarasını aynı anda kullanarak çok renkli baskılar oluşturmanıza olanak tanır. Hatta, ek CFS birimleri ile bu kapasite 16 renge kadar çıkarılabilir. Farklı malzemelerle baskı yapma imkanı da sunar (PLA, ABS, PETG gibi).
Teknik özellikler açısından K2 Plus, 350 x 350 x 350 mm'lik büyük bir baskı alanına ve 600 mm/s baskı hızına sahiptir. Ayrıca, çift dişli doğrudan tahrikli ekstruder, 4.3 inç renkli dokunmatik ekran, ve AI kamera izleme sistemi gibi ileri seviye özellikler sunar. Otomatik yatak dengeleme ve filament algılama gibi fonksiyonlar da baskı kalitesini artırır ve işlevselliği kolaylaştırır.
Etkileyici Temel Özellikler:
Creality CFS (Çoklu Filament Sistemi) CFS, kullanıcıların daha esnek, çeşitli ve verimli 3D baskılar yapmalarını sağlayan bir teknolojidir. Bu yenilikçi sistem, farklı renklerini aynı anda veya sırayla kullanarak daha karmaşık ve çeşitli projelerin gerçekleştirilmesine imkan tanır. 4xCFS bağlantısı ile 16 farklı renk ile baskılarınızı detaylandırır. |  |
Creality K2 Plus CFS Multi Color 3D Yazıcı Teknik Özellikler:
| Baskı Hacmi: | 350 x 350 x 350 mm | |
| Makine Boyutu: | 495*515*640 mm | ||
| Gerilim: | 100-240V-50/60Hz | ||
| Nozul sıcaklığı: | 350°C | ||
| Nozul: | Üçlü metal entegre ısı kırma nozulu 120 dereceye kadar ısıtma yatağı | ||
Ekstrüzyon sistemi: | APUS Filament kesicili tamamen metal doğrudan tahrikli ekstruder (1x). | ||
Baskı Hızı (tipik): | 300 mm/s | ||
Baskı Hızı (Maks): | 600 mm/s, 30'000 mm/s2 hızlanma ile Kamera: “AI” Kamera |
Intelligent Management of Multiple Filaments
Auto Identification&Mapping | Auto Run-out/Tangle Detection
Auto Filament Switch & Relay | Moisture-proof Filament Storage
Spring-loaded Batten Bar | Cardboard Spool Compatibility
16 Colors Level Up Your Creativity
The CFS comes with a connection hub on the back. By hooking up as many as four CFS units together, you are able to print in the splendor of 16 colors. Saves the need for extra painting afterward.
Powerfully Built "Matrix" Frame
A Sturdy, King-sized Beast
Dual Z-axis Assisted by 4 Linear Rods
Extremely steady while carrying the print bed up and down. Virtually no layer shift.
5mm Thick Aluminum Alloy Heatbed
Holding exceptionally well against deformation and vibration.
Cutting-edge Step-servo Motor x 5
Incredibly Quiet While Printing Hard
The working noise of K2 Plus is only 45dB, which is credited to the virtue of step-servo motors, dynamically balanced fans, and a snug enclosure It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to.
Blazing Speed, a New Record
For a large-format machine, 600mm/s is pretty fast, but that's not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s².
Active Belt Tensioning
Timing belts may get loose over time, leading to poor print quality and accuracy.
On the K2 Plus, the belt tension is checked and rigged actively by a pressure sensor instead of marhually. Now, belt tensioning is a thing you can forget about.
Automated Run-out & Sensor Filament Cutter
The steel-bladed cutter features a magnetic retraction mechanism for precise filament positioning and minimal waste, with an indicator to replace the filament when only one inch remains.
Next-gen Direct Drive Extruder
So Many Features Neatly Packed
40mm³/s High-flow Hotend
Powered by an 80W heater, the flow rate of ABS at 280℃ can reach 40mm³/s, 66% higher than the previous design.
Actively Heated Chamber & High-temp Nozzle with Hardened Steel Tip
Empowering More Use Scenarios & Phenomenal Print Quality, Every Time
Two Auxiliary Fans Set the Style Right Off
The part cooling airflow is nearly doubled with two auxiliary cooling fans installed on both sides of the chamber, ensuring model shapes and details are set before any stringing or warping occurs.
Dual Al Cameras and Many More Advanced Intelligence Has Your Back
Chamber AI Camera Keeps a Keen Watch
K2 Plus uses an Al camera on the chamber side to watch over spaghetti failure, foreign objects, idling, etc. It will alert you when an error occurs. It also supports real-time monitoring and time-lapse filming.
Toolhead Al Camera
Tunes the Flow Rate
Ingenious Anti-tilt Auto Leveling
K2 Plus features dual independently motorized Z-axes for automatic tilt reduction, strain gauge-based auto-leveling compensation, and a pro-level first layer capability that ensures a smooth and neat initial layer without manual intervention.
Smarter Software for a Seamless Workflow
The latest Creality OS will unlock the full power of your 3D printer. It features smart multi-filament management and allows for fire-tuning in expert mode or with root access. FLUIDD WebUI is also supported for your convenience.
User-friendly Like a Household Appliance
K2 Plus is pre-assembled, so you can use it right after unpacking and screen installation. Then, a boot-up quick guide covers self-tests.
Awesome Features Others May Not Offer
K2 Plus Combo 3D Printer
Printing Technology: Fused Deposition Modeling
Build Volume: 350*350*350mm
K2 Plus Dimensions: 495*515*640mm
K2 Plus Combo Dimensions: 495*515*916mm
K2 Plus Net Weight: 35Kg
Printing Speed: <600mm/s
Acceleration: 30000mm/s²
Printing Accuracy: 100mm±0.1mm
Layer Height: 0.05-0.3mm
Extruder: Dual-gear direct drive extruder
Filament Diameter: 1.75mm
Nozzle Diameter: 4mm
Nozzle Temperature: ≤350°C
Heatbed Temperature: ≤120°C
Chamber Temperature: ≤60°C
Build Plate: Flexible build plate
Leveling Mode: Full-auto Leveling
XYZE Motor: Servo-step motor
File Transfer: USB Drive/Ethernet/WiFi
File Storage: 32GB EMMC
Wifi: 2.4GHz/5GHz
RFID Sensor in Printer: Included
Rated Voltage: 100-240V~ AC 50/60Hz
Display Screen: 4.3" color touch screen
Rated Power: 1200W
Supported Filaments: PLA/ABS/PETG/PA-CF/ PLA-CF/ PET/ASA/PPA-CF
Al Camera for Monitoring: Standard
Al Camera for Calibration: Standard
Power Loss Recovery: Yes
Auto Filament Relay: Yes
Filament Tangle Detection: Yes
Air Purifier: Yes
Input Shaping: Yes
Lighting kit: Yes
Active Bed Tilt Calibration: Yes
Active Belt Tensioning: Yes
Active Chamber Heater: Yes
RFID-tagged Filaments: Yes
Printable File Format: Gcode/3MF
CFS Compatibility: Yes
Number of CFS Extensions: ≤4
Slicing Software: Creality Print 5.0 or newer versions
UI Languages: English/German/Spanish/French/Italian/ Portuguese/Russian/Turkish/Japanese/ Korean/Chinese
CFS SPECIFICATIONS
Product: CFS
Dimensions: 379*314*276 mm
Net Weight: 4.56kg
Number of Filament Slots: 4
Drying Method: Desiccant
Filament Buffer: IN*4 & OUT*1
Number of Extensions: ≤4
RFID Filament Recognition: Yes
Filament Diameter: 1.75±0.05mm
Supported 3D Printer: K2 Plus
Connection Port: Creality 485 *2
Power Supply: DC 24V (No need of extra power supply while connected to K2 Plus)
Rated Power: 20W
Status Indicator: Indicator light (white/red) x 4
Display Screen: Segment LCD showing temperature and humidity
Filament Spool Compatibility: 1Kg filament spool; diameter: 197-202mm, thickness: 42-68mm
Supported Filaments: PLA/PETG/ABS/ASA/PET/PLA-CF; *Not compatible with flexible TPU damp BVOH/PVA, or warped cardboard spools.Creality K2 Plus CFS Multi Color 3D Yazıcı
